-
1 ligne de référence
базовая линия (поверхность)
Линия (поверхность) заданной геометрической формы, определенным образом проведенная относительно профиля (поверхности) и служащая для оценки геометрических параметров поверхности.
[ ГОСТ 25142-82( СТ СЭВ 1156-78)]Тематики
Обобщающие термины
- поверхность, профиль и базы отсчета
EN
FR
Франко-русский словарь нормативно-технической терминологии > ligne de référence
-
2 déport de la ligne primitive de la crémaillère de référence
расположение расчетной линии эталонной кремальеры
a
Расстояние между расчетной линией эталонной кремальеры и нижней линией

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: pitch line location
Distance between the pitch line and the root line of the rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
déport de la ligne primitive de la crémaillère de référence
Distance comprise entre la ligne primitive de la crémaillère de référence et sa ligne de pied
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: pitch line location
FR
Франко-русский словарь нормативно-технической терминологии > déport de la ligne primitive de la crémaillère de référence
-
3 ligne primitive de la crémaillère de référence
расчетная линия эталонной кремальеры
Линия, по отношению к которой определяются размеры зубьев эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: pitch line
Line, with reference to which the dimensions of the rack teeth are defined
[ ГОСТ 28500-90( ИСО 5288-82)]FR
ligne primitive de la crémaillère de référence
Ligne par rapport a laquelle sont définies les dimensions des dents de la crémaillère de référence
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: pitch line
FR
Франко-русский словарь нормативно-технической терминологии > ligne primitive de la crémaillère de référence
-
4 crémaillere de référence
эталонная кремальера
Вымышленная кремальера, сечение которой перпендикулярно к ребрам зубьев и служит для определения нормализованных размеров зубьев в развертке той же системы шкивов
[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: pitch line
Line, with reference to which the dimensions of the rack teeth are defined
[ ГОСТ 28500-90( ИСО 5288-82)]FR
crémaillere de référence
Crémaillere dont la section perpendiculaire aux arêtes des dents sert à définir les dimensions normalisées des dents en développante d'un même système de poulies
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: pitch line
FR
Франко-русский словарь нормативно-технической терминологии > crémaillere de référence
-
5 ligne de tête de la cremaillere de reference
верхняя линия эталонной кремальеры
Линия, соединяющая верхние поверхности зубьев, в продольном сечении эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: tip line
Line joining the tips of the teeth of a rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
ligne de tête de la cremaillere de reference
Ligne reliant les têtes des dents d'une section longitudinale de la crémaillère
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: tip line
FR
Франко-русский словарь нормативно-технической терминологии > ligne de tête de la cremaillere de reference
-
6 ligne de pied de la crémaillère de référence
нижняя линия эталонной кремальеры
Линия, соединяющая поверхности кремальеры, расположенные между зубьями, в продольном сечении эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: root line
Line joining the low points between the teeth of a rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
ligne de pied de la crémaillère de référence
Ligne reliant les fonds des dents d'un section longitudinale de la crémaillère
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: root line
FR
Франко-русский словарь нормативно-технической терминологии > ligne de pied de la crémaillère de référence
-
7 flanc d'une dent de la crémaillère de référence
боковая поверхность зуба эталонной кремальеры
Часть зуба эталонной кремальеры между уровнем верхней и нижней линии

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: flank
Portion of the rack tooth contained between the tip line and the root line
[ ГОСТ 28500-90( ИСО 5288-82)]FR
flanc d'une dent de la crémaillère de référence
Partie d'une dent de la crémaillère de référence qui est comprise entre la ligne de tête et la ligne de pied
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: flank
FR
Франко-русский словарь нормативно-технической терминологии > flanc d'une dent de la crémaillère de référence
-
8 hauteur de dent de la crémaillère de référence
высота зуба эталонной кремальеры
hr
Расстояние между верхней и нижней линиями, расположенными в одном и том же прямом продольном сечении эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: tooth height
Distance between the tip line and the root line of the rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
hauteur de dent de la crémaillère de référence
Distance comprise entre une ligne de tête et une ligne de pied situées dans la même section droite longitudinale de la crémaillère de référence
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
Сопутствующие термины
- reference rack: tooth height
FR
Франко-русский словарь нормативно-технической терминологии > hauteur de dent de la crémaillère de référence
-
9 courant de référence d'un parafoudre
классификационный ток ОПН
Iкл
Амплитудное значение (более высокое амплитудное значение из двух полярностей, если ток асимметричен) активной составляющей тока промышленной частоты, которое используется для определения классификационного напряжения ОПН и нормируется изготовителем.
[ ГОСТ Р 52725-2007]EN
reference current of an arrester
peak value (the higher peak value of the two polarities if the current is asymmetrical) of the resistive component of a power-frequency current used to determine the reference voltage of the arrester
NOTE 1 The reference current will be high enough to make the effects of stray capacitances at the measured reference voltage of the arrester units (with designed grading system) negligible and is to be specified by the manufacturer.
NOTE 2 Depending on the nominal discharge current and/or line discharge class of the arrester, the reference current will be typically in the range of 0,05 mA to 1,0 mA per square centimetre of disc area for single column arresters.
[IEC 60099-4, ed. 2.0 (2004-05)]FR
courant de référence d'un parafoudre
valeur de crête (la plus grande des deux polarités si le courant est dissymétrique) de la composante résistive du courant à fréquence industrielle utilisée pour déterminer la tension de référence d'un parafoudre.
NOTE 1 Il convient que le courant de référence soit suffisamment élevé pour rendre négligeables les effets des capacités parasites aux tensions de référence mesurées sur les éléments de parafoudre (avec leur système de répartition) et qu’il soit spécifié par le constructeur.
NOTE 2 Fonction du courant de décharge nominal et/ou de la classe de décharge de ligne du parafoudre, il convient que le courant de référence soit typiquement dans la gamme de 0,05 mA à 1,0 mA par centimètre carré de surface de disque pour les parafoudres à colonne unique
[IEC 60099-4, ed. 2.0 (2004-05)]Тематики
- высоковольтный аппарат, оборудование...
EN
FR
Франко-русский словарь нормативно-технической терминологии > courant de référence d'un parafoudre
-
10 rayon en tête d'une dent de la crémaillère de référence
радиус в верхней части зуба эталонной кремальеры
r1
Радиус закругления, соединяющего боковую поверхность зуба с верхней линией в прямом продольном сечении эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: radius at tooth tip
Radius of a curve connecting the tooth flank with the tip line of the rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
rayon en tête d'une dent de la crémaillère de référence
Dans une section droite longitudinale de la crémaillère de référence, rayon de l'arrondi reliant un flanc de dent à la ligne de tête
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: radius at tooth tip
FR
Франко-русский словарь нормативно-технической терминологии > rayon en tête d'une dent de la crémaillère de référence
-
11 rayon au pied d'une dent de la crémaillère de référence
радиус у основания зуба эталонной кремальеры
r2
Радиус закругления, соединяющего боковую поверхность зуба с нижней линией в прямом продольном сечении эталонной кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: radius at tooth root
Radius of a curve connecting the tooth flank with the root line of the rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
rayon au pied d'une dent de la crémaillère de référence
Dans une section droite longitu-dinale de la crémaillère de référence, rayon de l'arrondi reliant un flanc de dent à la ligne de pied
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: radius at tooth root
FR
Франко-русский словарь нормативно-технической терминологии > rayon au pied d'une dent de la crémaillère de référence
-
12 largeur en tête de dent de la crémaillère de référence
ширина в верхней части зуба эталонной кремальеры
bg
Расстояние между теоретическими точками пересечения боковых поверхностей зуба с верхней линией в прямом продольном сечении кремальеры

[ ГОСТ 28500-90( ИСО 5288-82)]EN
reference rack: width at tooth tip
Linear distance between the theoretical points of intersection of the tooth flanks with the tip line of the rack
[ ГОСТ 28500-90( ИСО 5288-82)]FR
largeur en tête de dent de la crémaillère de référence
Dans une section droite longitudinale de la ccrémaillère de référence, distance comprise entre les points théoriques d'intersection des flancs d'une dent avec la ligne de tête
[ ГОСТ 28500-90( ИСО 5288-82)]Тематики
EN
- reference rack: width at tooth tip
FR
Франко-русский словарь нормативно-технической терминологии > largeur en tête de dent de la crémaillère de référence
-
13 ligne de section conditionnelle d'ampoule
условная линия баллона
Проекция сечения баллона электронно-лучевого прибора плоскостью, перпендикулярной к его продольной оси, относительно которой указываются основные размеры.
[ ГОСТ 17791-82]Тематики
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > ligne de section conditionnelle d'ampoule
-
14 tension phase-terre, f
напряжение линейного проводника относительно земли
Нрк. фазное напряжение относительно земли
Напряжение между линейным проводником и эталонной (относительной) землей в данной точке электрической цепи.
[ ГОСТ Р МЭК 60050-826-2009]
фазное напряжение относительно земли
Напряжение между линейным проводником и относительной землей в данной точке электрической цепи переменного тока.
[ ГОСТ Р МЭК 60050-195-2005]EN
line-to-earth voltage
line-to-ground voltage (US)
phase-to-earth voltage (deprecated)
voltage between a line conductor and reference earth at a given point of an electric circuit
Source: 195-05-03
[IEV number 826-11-08]FR
tension phase-terre, f
tension entre un conducteur de ligne et la terre de référence en un point donné d'un circuit électrique
Source: 195-05-03
[IEV number 826-11-08]Недопустимые, нерекомендуемые
Тематики
EN
DE
- Spannung Außenleiter - Erde, f
FR
- tension phase-terre, f
Франко-русский словарь нормативно-технической терминологии > tension phase-terre, f
-
15 zone de tolérance d'inclinaison d'une ligne par rapport à une ligne ou à une surface
- поле допуска наклона оси (или прямой) относительно оси (прямой) или плоскости
поле допуска наклона оси (или прямой) относительно оси (прямой) или плоскости
Область на плоскости, ограниченная двумя параллельными прямыми, отстоящими друг от друга на расстоянии, равном допуску наклона TPN, и расположенными под номинальным углом к базовой оси (прямой) или базовой плоскости.

Примечание
Термин применяется при любых номинальных значениях угла наклона, кроме 0°, 90°, 180°.
[ ГОСТ 24642-81]Тематики
Обобщающие термины
EN
- tolerance zone of angularity of a line with reference to a datum line
- tolerance zone of angularity of a line with reference to a datum plane
DE
FR
- zone de tolérance d'inclinaison d'une ligne par rapport à une ligne ou à une surface
Франко-русский словарь нормативно-технической терминологии > zone de tolérance d'inclinaison d'une ligne par rapport à une ligne ou à une surface
-
16 tension assignée
номинальное напряжение
Напряжение, установленное изготовителем для прибора
[ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]
номинальное напряжение Uном, кВ
Номинальное междуфазное напряжение электрической сети, для работы в которой предназначены коммутационные аппараты.
[ ГОСТ Р 52726-2007]
номинальное напряжение
Un
Напряжение, применяемое для обозначения или идентификации системы электроснабжения.
[ ГОСТ Р 51317.4.30-2008 (МЭК 61000-4-30:2008)]EN
rated voltage
voltage assigned to the appliance by the manufacturer
[IEC 60335-1, ed. 4.0 (2001-05)]
rated voltage
quantity value assigned, generally by the manufacturer, for a specified operating condition of a machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
rated voltage
input or output supply voltage for which equipment is designed or specified
[IEC 88528-11, ed. 1.0 (2004-03)]
rated voltage
specified value of the voltage at the terminals of the machine when operating at a rating. If unidirectional, the voltage is the arithmetic mean of the recurring waveform and if alternating it is the root mean square value of the fundamental frequency component of the recurring waveform
NOTE - In the case of a machine with a protective resistor permanently in series, the resistor is considered as an integral part of the machine
[IEC 60349-1, ed. 1.0 (1999-11)]
rated voltage
the value of voltage assigned by the manufacturer to a component, device or equipment and to which operation and performance characteristics are referred
NOTE - Equipment may have more than one rated voltage value or may have a rated voltage range.
[IEC 62497-1, ed. 1.0 (2010-02)]
rated voltage
reference voltage for which the cable is designed, and which serves to define the electrical tests
NOTE 1 - The rated voltage is expressed by the combination of two values: Uo/U expressed in volts (V):
Uo being the r.m.s. value between any insulated conductor and "earth" (metal covering of the cable or the surrounding medium);
U being the r.m.s. value between any two phase conductors of a multicore cable or of a system of single-core cables.
In an alternating-current system, the rated voltage of a cable is at least equal to the nominal voltage of the system for which it is intended.
This condition applies both to the value Uo and to the value U.
In a direct current system, the nominal voltage of the system is not higher than 1,5 times the rated voltage of the cable.
NOTE 2 - The operating voltage of a system may permanently exceed the nominal voltage of such a system by 10 %. A cable can be used at a 10 % higher operating voltage than its rated voltage if the latter is at least equal to the nominal voltage of the system
[IEC 60245-1, ed. 4.0 (2003-12)]
rated voltage
highest allowable voltage between the conductors in a twin and multi conductor cable, or between one conductor and an electrical conductive screen, or between the two ends of a single core cable, or earth in unscreened cables
[IEC 60800, ed. 3.0 (2009-07)]
rated voltage
the r.m.s. line-to-line voltage under rated conditions
Primary side of input transformer: ULN
Converter input: UVN
Converter output: UaN
Motor voltage: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
rated voltage
input or output voltage (for three-phase supply, the phase-to-phase voltage) as declared by the manufacturer
[IEC 62040-1, ed. 1.0 (2008-06)]
nominal voltage, Un
voltage by which a system is designated or identified
[IEC 61000-4-30, ed. 2.0 (2008-10)]FR
tension assignée
tension attribuée à l'appareil par le fabricant
[IEC 60335-1, ed. 4.0 (2001-05)]
tension nominale
tension assignée, généraleme<>value of voltage assigned by the manufacturer, to a componentnt par le constructeur pour des conditions spécifiées de fonctionnement de la machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
tension assignée
tension spécifiée aux bornes de la machine quand celle-ci fonctionne au régime assigné. Dans le cas d'une tension redressée, sa valeur est égale à la valeur moyenne de l'onde périodique. Dans le cas d'une tension alternative, sa valeur est égale à la valeur efficace de la composante fondamentale de l'onde périodique
NOTE - Dans le cas d'une machine équipée d'une résistance de protection connectée en permanence en série, la résistance est considérée comme faisant partie intégrante de la machine
[IEC 60349-1, ed. 1.0 (1999-11)]
tension assignée
valeur de la tension, assignée par le constructeur à un composant, à un dispositif ou à un matériel, et à laquelle on se réfère pour le fonctionnement et pour les caractéristiques fonctionnelles
NOTE - Les matériels peuvent avoir plusieurs valeurs ou une plage de tensions assignées.
[IEC 62497-1, ed. 1.0 (2010-02)]
tension assignée
tension de référence pour laquelle le conducteur ou le câble est prévu et qui sert à définir les essais électriques
NOTE 1 - La tension assignée est exprimée par la combinaison de deux valeurs Uo /U, exprimées en volts (V):
Uo étant la valeur efficace entre l'âme d'un conducteur isolé quelconque et la «terre» (revêtement métallique du câble au milieu environnant);
U étant la valeur efficace entre les âmes conductrices de deux conducteurs de phase quelconques d'un câble multiconducteur ou d'un système de câbles monoconducteurs ou de conducteurs.
Dans un système à courant alternatif, la tension assignée d'un conducteur ou d’un câble est au moins égale à la tension nominale du système pour lequel il est prévu.
Cette condition s'applique à la fois à la valeur Uo et à la valeur U.
Dans un système à courant continu, la tension nominale admise du système n’est pas supérieure à 1,5 fois la tension assignée du conducteur ou du câble.
NOTE 2 - La tension de service d'un système peut en permanence dépasser la tension nominale dudit système de 10 %. Un conducteur ou un câble peut être utilisé à une tension de service supérieure de 10 % à sa tension assignée si cette dernière est au moins égale à la tension nominale du système
[IEC 60245-1, ed. 4.0 (2003-12)]
tension assignée
tension maximale admissible entre les âmes dans un câble ayant une paire ou multi conducteur ou entre une âme et un écran conducteur électrique ou avec la terre pour un câble non écranté ou encore entre les deux extrémités d’un câble à âme unique
[IEC 60800, ed. 3.0 (2009-07)]
tension assignée
valeur efficace de la tension de ligne (entre phases) dans les conditions assignées
Primaire du transformateur d’entrée: ULN
Entrée du convertisseur: UVN
Sortie du convertisseur: UaN
Moteur: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
tension assignée
tension d’alimentation d’entrée ou de sortie (dans le cas d’une alimentation triphasée, tension entre phases) déclarée par le constructeur
[IEC 62040-1, ed. 1.0 (2008-06)]
tension nominale, Un
tension par laquelle un réseau est désigné ou identifié
[IEC 61000-4-30, ed. 2.0 (2008-10)]Тематики
- аппарат, изделие, устройство...
- высоковольтный аппарат, оборудование...
- прибор электрический
- электроснабжение в целом
Синонимы
- Un
EN
FR
Франко-русский словарь нормативно-технической терминологии > tension assignée
-
17 tension nominale
номинальное напряжение
Напряжение, установленное изготовителем для прибора
[ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]
номинальное напряжение Uном, кВ
Номинальное междуфазное напряжение электрической сети, для работы в которой предназначены коммутационные аппараты.
[ ГОСТ Р 52726-2007]
номинальное напряжение
Un
Напряжение, применяемое для обозначения или идентификации системы электроснабжения.
[ ГОСТ Р 51317.4.30-2008 (МЭК 61000-4-30:2008)]EN
rated voltage
voltage assigned to the appliance by the manufacturer
[IEC 60335-1, ed. 4.0 (2001-05)]
rated voltage
quantity value assigned, generally by the manufacturer, for a specified operating condition of a machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
rated voltage
input or output supply voltage for which equipment is designed or specified
[IEC 88528-11, ed. 1.0 (2004-03)]
rated voltage
specified value of the voltage at the terminals of the machine when operating at a rating. If unidirectional, the voltage is the arithmetic mean of the recurring waveform and if alternating it is the root mean square value of the fundamental frequency component of the recurring waveform
NOTE - In the case of a machine with a protective resistor permanently in series, the resistor is considered as an integral part of the machine
[IEC 60349-1, ed. 1.0 (1999-11)]
rated voltage
the value of voltage assigned by the manufacturer to a component, device or equipment and to which operation and performance characteristics are referred
NOTE - Equipment may have more than one rated voltage value or may have a rated voltage range.
[IEC 62497-1, ed. 1.0 (2010-02)]
rated voltage
reference voltage for which the cable is designed, and which serves to define the electrical tests
NOTE 1 - The rated voltage is expressed by the combination of two values: Uo/U expressed in volts (V):
Uo being the r.m.s. value between any insulated conductor and "earth" (metal covering of the cable or the surrounding medium);
U being the r.m.s. value between any two phase conductors of a multicore cable or of a system of single-core cables.
In an alternating-current system, the rated voltage of a cable is at least equal to the nominal voltage of the system for which it is intended.
This condition applies both to the value Uo and to the value U.
In a direct current system, the nominal voltage of the system is not higher than 1,5 times the rated voltage of the cable.
NOTE 2 - The operating voltage of a system may permanently exceed the nominal voltage of such a system by 10 %. A cable can be used at a 10 % higher operating voltage than its rated voltage if the latter is at least equal to the nominal voltage of the system
[IEC 60245-1, ed. 4.0 (2003-12)]
rated voltage
highest allowable voltage between the conductors in a twin and multi conductor cable, or between one conductor and an electrical conductive screen, or between the two ends of a single core cable, or earth in unscreened cables
[IEC 60800, ed. 3.0 (2009-07)]
rated voltage
the r.m.s. line-to-line voltage under rated conditions
Primary side of input transformer: ULN
Converter input: UVN
Converter output: UaN
Motor voltage: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
rated voltage
input or output voltage (for three-phase supply, the phase-to-phase voltage) as declared by the manufacturer
[IEC 62040-1, ed. 1.0 (2008-06)]
nominal voltage, Un
voltage by which a system is designated or identified
[IEC 61000-4-30, ed. 2.0 (2008-10)]FR
tension assignée
tension attribuée à l'appareil par le fabricant
[IEC 60335-1, ed. 4.0 (2001-05)]
tension nominale
tension assignée, généraleme<>value of voltage assigned by the manufacturer, to a componentnt par le constructeur pour des conditions spécifiées de fonctionnement de la machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
tension assignée
tension spécifiée aux bornes de la machine quand celle-ci fonctionne au régime assigné. Dans le cas d'une tension redressée, sa valeur est égale à la valeur moyenne de l'onde périodique. Dans le cas d'une tension alternative, sa valeur est égale à la valeur efficace de la composante fondamentale de l'onde périodique
NOTE - Dans le cas d'une machine équipée d'une résistance de protection connectée en permanence en série, la résistance est considérée comme faisant partie intégrante de la machine
[IEC 60349-1, ed. 1.0 (1999-11)]
tension assignée
valeur de la tension, assignée par le constructeur à un composant, à un dispositif ou à un matériel, et à laquelle on se réfère pour le fonctionnement et pour les caractéristiques fonctionnelles
NOTE - Les matériels peuvent avoir plusieurs valeurs ou une plage de tensions assignées.
[IEC 62497-1, ed. 1.0 (2010-02)]
tension assignée
tension de référence pour laquelle le conducteur ou le câble est prévu et qui sert à définir les essais électriques
NOTE 1 - La tension assignée est exprimée par la combinaison de deux valeurs Uo /U, exprimées en volts (V):
Uo étant la valeur efficace entre l'âme d'un conducteur isolé quelconque et la «terre» (revêtement métallique du câble au milieu environnant);
U étant la valeur efficace entre les âmes conductrices de deux conducteurs de phase quelconques d'un câble multiconducteur ou d'un système de câbles monoconducteurs ou de conducteurs.
Dans un système à courant alternatif, la tension assignée d'un conducteur ou d’un câble est au moins égale à la tension nominale du système pour lequel il est prévu.
Cette condition s'applique à la fois à la valeur Uo et à la valeur U.
Dans un système à courant continu, la tension nominale admise du système n’est pas supérieure à 1,5 fois la tension assignée du conducteur ou du câble.
NOTE 2 - La tension de service d'un système peut en permanence dépasser la tension nominale dudit système de 10 %. Un conducteur ou un câble peut être utilisé à une tension de service supérieure de 10 % à sa tension assignée si cette dernière est au moins égale à la tension nominale du système
[IEC 60245-1, ed. 4.0 (2003-12)]
tension assignée
tension maximale admissible entre les âmes dans un câble ayant une paire ou multi conducteur ou entre une âme et un écran conducteur électrique ou avec la terre pour un câble non écranté ou encore entre les deux extrémités d’un câble à âme unique
[IEC 60800, ed. 3.0 (2009-07)]
tension assignée
valeur efficace de la tension de ligne (entre phases) dans les conditions assignées
Primaire du transformateur d’entrée: ULN
Entrée du convertisseur: UVN
Sortie du convertisseur: UaN
Moteur: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
tension assignée
tension d’alimentation d’entrée ou de sortie (dans le cas d’une alimentation triphasée, tension entre phases) déclarée par le constructeur
[IEC 62040-1, ed. 1.0 (2008-06)]
tension nominale, Un
tension par laquelle un réseau est désigné ou identifié
[IEC 61000-4-30, ed. 2.0 (2008-10)]Тематики
- аппарат, изделие, устройство...
- высоковольтный аппарат, оборудование...
- прибор электрический
- электроснабжение в целом
Синонимы
- Un
EN
FR
номинальное напряжение конденсатора
Максимальное напряжение, при котором конденсатор может работать в течение минимальной наработки в условиях, указанных в нормативно-технической документации
[ ГОСТ 21415-75]
номинальное напряжение конденсатора
Действующее значение синусоидального переменного напряжения при номинальной частоте, на которое рассчитан конденсатор. Номинальное напряжение многофазного конденсатора - значение напряжения между выводами.
[ ГОСТ 1282-88]Тематики
- конденсаторы для повыш. коэф. мощности
- конденсаторы для электронной аппаратуры
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > tension nominale
-
18 Un
номинальное напряжение
Напряжение, установленное изготовителем для прибора
[ ГОСТ Р 52161. 1-2004 ( МЭК 60335-1: 2001)]
номинальное напряжение Uном, кВ
Номинальное междуфазное напряжение электрической сети, для работы в которой предназначены коммутационные аппараты.
[ ГОСТ Р 52726-2007]
номинальное напряжение
Un
Напряжение, применяемое для обозначения или идентификации системы электроснабжения.
[ ГОСТ Р 51317.4.30-2008 (МЭК 61000-4-30:2008)]EN
rated voltage
voltage assigned to the appliance by the manufacturer
[IEC 60335-1, ed. 4.0 (2001-05)]
rated voltage
quantity value assigned, generally by the manufacturer, for a specified operating condition of a machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
rated voltage
input or output supply voltage for which equipment is designed or specified
[IEC 88528-11, ed. 1.0 (2004-03)]
rated voltage
specified value of the voltage at the terminals of the machine when operating at a rating. If unidirectional, the voltage is the arithmetic mean of the recurring waveform and if alternating it is the root mean square value of the fundamental frequency component of the recurring waveform
NOTE - In the case of a machine with a protective resistor permanently in series, the resistor is considered as an integral part of the machine
[IEC 60349-1, ed. 1.0 (1999-11)]
rated voltage
the value of voltage assigned by the manufacturer to a component, device or equipment and to which operation and performance characteristics are referred
NOTE - Equipment may have more than one rated voltage value or may have a rated voltage range.
[IEC 62497-1, ed. 1.0 (2010-02)]
rated voltage
reference voltage for which the cable is designed, and which serves to define the electrical tests
NOTE 1 - The rated voltage is expressed by the combination of two values: Uo/U expressed in volts (V):
Uo being the r.m.s. value between any insulated conductor and "earth" (metal covering of the cable or the surrounding medium);
U being the r.m.s. value between any two phase conductors of a multicore cable or of a system of single-core cables.
In an alternating-current system, the rated voltage of a cable is at least equal to the nominal voltage of the system for which it is intended.
This condition applies both to the value Uo and to the value U.
In a direct current system, the nominal voltage of the system is not higher than 1,5 times the rated voltage of the cable.
NOTE 2 - The operating voltage of a system may permanently exceed the nominal voltage of such a system by 10 %. A cable can be used at a 10 % higher operating voltage than its rated voltage if the latter is at least equal to the nominal voltage of the system
[IEC 60245-1, ed. 4.0 (2003-12)]
rated voltage
highest allowable voltage between the conductors in a twin and multi conductor cable, or between one conductor and an electrical conductive screen, or between the two ends of a single core cable, or earth in unscreened cables
[IEC 60800, ed. 3.0 (2009-07)]
rated voltage
the r.m.s. line-to-line voltage under rated conditions
Primary side of input transformer: ULN
Converter input: UVN
Converter output: UaN
Motor voltage: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
rated voltage
input or output voltage (for three-phase supply, the phase-to-phase voltage) as declared by the manufacturer
[IEC 62040-1, ed. 1.0 (2008-06)]
nominal voltage, Un
voltage by which a system is designated or identified
[IEC 61000-4-30, ed. 2.0 (2008-10)]FR
tension assignée
tension attribuée à l'appareil par le fabricant
[IEC 60335-1, ed. 4.0 (2001-05)]
tension nominale
tension assignée, généraleme<>value of voltage assigned by the manufacturer, to a componentnt par le constructeur pour des conditions spécifiées de fonctionnement de la machine
[IEC 60034-18-41, ed. 1.0 (2006-10)]
tension assignée
tension spécifiée aux bornes de la machine quand celle-ci fonctionne au régime assigné. Dans le cas d'une tension redressée, sa valeur est égale à la valeur moyenne de l'onde périodique. Dans le cas d'une tension alternative, sa valeur est égale à la valeur efficace de la composante fondamentale de l'onde périodique
NOTE - Dans le cas d'une machine équipée d'une résistance de protection connectée en permanence en série, la résistance est considérée comme faisant partie intégrante de la machine
[IEC 60349-1, ed. 1.0 (1999-11)]
tension assignée
valeur de la tension, assignée par le constructeur à un composant, à un dispositif ou à un matériel, et à laquelle on se réfère pour le fonctionnement et pour les caractéristiques fonctionnelles
NOTE - Les matériels peuvent avoir plusieurs valeurs ou une plage de tensions assignées.
[IEC 62497-1, ed. 1.0 (2010-02)]
tension assignée
tension de référence pour laquelle le conducteur ou le câble est prévu et qui sert à définir les essais électriques
NOTE 1 - La tension assignée est exprimée par la combinaison de deux valeurs Uo /U, exprimées en volts (V):
Uo étant la valeur efficace entre l'âme d'un conducteur isolé quelconque et la «terre» (revêtement métallique du câble au milieu environnant);
U étant la valeur efficace entre les âmes conductrices de deux conducteurs de phase quelconques d'un câble multiconducteur ou d'un système de câbles monoconducteurs ou de conducteurs.
Dans un système à courant alternatif, la tension assignée d'un conducteur ou d’un câble est au moins égale à la tension nominale du système pour lequel il est prévu.
Cette condition s'applique à la fois à la valeur Uo et à la valeur U.
Dans un système à courant continu, la tension nominale admise du système n’est pas supérieure à 1,5 fois la tension assignée du conducteur ou du câble.
NOTE 2 - La tension de service d'un système peut en permanence dépasser la tension nominale dudit système de 10 %. Un conducteur ou un câble peut être utilisé à une tension de service supérieure de 10 % à sa tension assignée si cette dernière est au moins égale à la tension nominale du système
[IEC 60245-1, ed. 4.0 (2003-12)]
tension assignée
tension maximale admissible entre les âmes dans un câble ayant une paire ou multi conducteur ou entre une âme et un écran conducteur électrique ou avec la terre pour un câble non écranté ou encore entre les deux extrémités d’un câble à âme unique
[IEC 60800, ed. 3.0 (2009-07)]
tension assignée
valeur efficace de la tension de ligne (entre phases) dans les conditions assignées
Primaire du transformateur d’entrée: ULN
Entrée du convertisseur: UVN
Sortie du convertisseur: UaN
Moteur: UAN
[IEC 61800-4, ed. 1.0 (2002-09)]
tension assignée
tension d’alimentation d’entrée ou de sortie (dans le cas d’une alimentation triphasée, tension entre phases) déclarée par le constructeur
[IEC 62040-1, ed. 1.0 (2008-06)]
tension nominale, Un
tension par laquelle un réseau est désigné ou identifié
[IEC 61000-4-30, ed. 2.0 (2008-10)]Тематики
- аппарат, изделие, устройство...
- высоковольтный аппарат, оборудование...
- прибор электрический
- электроснабжение в целом
Синонимы
- Un
EN
FR
Франко-русский словарь нормативно-технической терминологии > Un
-
19 zone de tolérance de parallélisme d'une ligne par rapport à une ligne
поле допуска параллельности осей (или прямых) в пространстве
1) область в пространстве, ограниченная прямоугольным параллелепипедом, стороны сечения которого равны соответственно допуску параллельности осей (прямых) в общей плоскости TPAx и допуску перекоса осей (прямых) TPAy, а боковые грани параллельны базовой оси и соответственно параллельны и перпендикулярны к общей плоскости осей;

2) область в пространстве, ограниченная цилиндром, диаметр которого равен допуску параллельности TPA, а ось параллельна базовой оси.

[ ГОСТ 24642-81]Тематики
Обобщающие термины
EN
DE
FR
Франко-русский словарь нормативно-технической терминологии > zone de tolérance de parallélisme d'une ligne par rapport à une ligne
-
20 zone de tolérance de parallélisme d'une ligne par rapport à une ligne dans une seule plane
поле допуска параллельности прямых в плоскости
Область на плоскости, ограниченная двумя параллельными прямыми, отстоящими друг от друга на расстоянии, равном допуску параллельности TPA, и параллельными базовой прямой.

[ ГОСТ 24642-81]Тематики
Обобщающие термины
EN
- tolerance zone of parallelism of a line with reference to a datum line in one plane
DE
FR
- zone de tolérance de parallélisme d'une ligne par rapport à une ligne dans une seule plane
Франко-русский словарь нормативно-технической терминологии > zone de tolérance de parallélisme d'une ligne par rapport à une ligne dans une seule plane
- 1
- 2
См. также в других словарях:
reference line — noun : an arbitrary fixed line (as an x axis or a polar axis) from which coordinates of a point are computed … Useful english dictionary
Reference line — Линия отсчёта; Ось координат … Краткий толковый словарь по полиграфии
fuselage reference line — The straight line used as a reference from which basic dimensions are laid out and major components are located. It is usually along the plane of symmetry and at a convenient height. See fuselage datum … Aviation dictionary
line of constant bearing — In air navigation, a line from a fixed or a moving point to a moving object or a fixed point that retains a constant angular value with respect to a reference line. AB, A′B′, A″B″ = Lines of constant bearing … Aviation dictionary
Line level — is a term used to denote the strength of an audio signal used to transmit analog sound information between audio components such as CD and DVD players, TVs, audio amplifiers, and mixing consoles, and sometimes MP3 players. In contrast to line… … Wikipedia
Line — Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A linen… … The Collaborative International Dictionary of English
Line breeding — Line Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A… … The Collaborative International Dictionary of English
Line conch — Line Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A… … The Collaborative International Dictionary of English
Line engraving — Line Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A… … The Collaborative International Dictionary of English
Line of battle — Line Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A… … The Collaborative International Dictionary of English
Line of battle ship — Line Line, n. [OE. line, AS. l[=i]ne cable, hawser, prob. from L. linea a linen thread, string, line, fr. linum flax, thread, linen, cable; but the English word was influenced by F. ligne line, from the same L. word linea. See {Linen}.] 1. A… … The Collaborative International Dictionary of English